111-198-567A VW Solex 28 PCI Carburetor Rebuild Kit - Beetle, Bus, Ghia

VW Solex 28 PCI Carburetor Rebuild Kit – 111-198-567A

Restore the smooth idling and throttle response of your vintage engine with this premium Solex 28 PCI Carburetor Rebuild Kit. Specifically designed for the "fixed-pedestal" 36hp engines, the 28 PCI is the classic fueling heart of the early air-cooled era. Over decades of service, original gaskets become brittle and internal seals perish, leading to common issues like flat spots during acceleration, fuel weeping, and difficult hot starts.

The 111-198-567A kit is a comprehensive solution that provides all the soft parts necessary to perform a professional-grade overhaul. It includes high-quality gaskets that are precision-cut to match the original Solex patterns, ensuring a leak-free seal between the carburetor body and the air cleaner, as well as the intake manifold. By refreshing your 28 PCI with modern, fuel-resistant components, you can maintain the period-correct performance and charm of your early Volkswagen.

Detailed Vehicle Compatibility This kit is designed for the 36hp engines equipped with the Solex 28 PCI carburetor:

VW Beetle (Standard):

• 1954, 1955, 1956, 1957, 1958, 1959, 1960

VW Bus (Type 2):

• 1955, 1956, 1957, 1958, 1959, 1960

VW Karmann Ghia:

• 1956, 1957, 1958, 1959, 1960

Product Highlights & Features Precision Needle & Seat: Includes a new float needle valve to prevent carburetor flooding and ensure the fuel bowl maintains the correct level.

Ethanol-Resistant Gaskets: All fiber and rubber components are manufactured to withstand modern pump gas additives that typically degrade vintage materials.

Accelerator Pump Diaphragm: Features a high-flex diaphragm to restore the "squirt" of fuel needed to eliminate hesitation when pulling away from a stop.

Complete Sealing Hardware: Comes with the necessary copper and fiber washers for the jet plugs and fuel inlet, preventing slow leaks that can stain your engine case.

Technical Specifications Part Number: 111-198-567A

Carburetor Model: Solex 28 PCI

Engine Application: 1100cc / 1200cc (36hp)

Kit Contents: Top Gasket, Base Gasket, Diaphragms, Needle/Seat, O-rings, and Washers

Installation & Maintenance Tips Soak Before Assembly: For the best results, soak the carburetor body in a dedicated cleaner to remove varnish from the internal passages. Ensure all passages are blown clear with compressed air before installing the new kit components.

Check the Float: While the carburetor is open, check your brass float for leaks. Shake it near your ear; if you hear liquid inside, the float is "sunk" and must be replaced for the new needle valve to work correctly.

Don't Over-Tighten the Top: The 28 PCI top plate is made of soft zinc alloy. Tighten the screws evenly and gently to avoid warping the top, which can lead to persistent vacuum leaks.

Adjust the Mixture: After installation, remember to reset your idle speed and volume control screws. Because the new seals will likely change the vacuum profile, a fine-tune adjustment is essential for a smooth idle.

111198567A