111-498-101A VW Beetle Front Sway Bar Clamp & Hardware Kit (1966-1977)

VW Front Sway Bar Clamp Kit – 111-498-101A

The 111-498-101A is a comprehensive hardware kit designed to secure the front anti-sway bar to the lower torsion arms of your Volkswagen. This kit is specifically for the later "Ball Joint" front ends. A functional sway bar is essential for reducing body roll during cornering and improving overall handling stability. Because the sway bar is located at the lowest point of the front suspension, the original clamps and bolts are frequently subjected to road salt, moisture, and impact damage.

This kit replaces the often-rusted or bent original hardware, ensuring the sway bar is held firmly in place against the torsion arm bushings. Loose or missing sway bar hardware can lead to "clunking" noises in the front end and vague steering response. The 111-498-101A kit provides a factory-style fit, restoring the tension required for the sway bar to perform its job effectively.

Detailed Vehicle Compatibility This kit is designed for Standard Beetle and Ghia models with Ball Joint front ends:

VW Beetle (Standard):

• 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977

VW Karmann Ghia:

• 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974

Product Highlights & Features

• Complete Hardware Set: Includes the heavy-duty metal clamps and the necessary bolts/nuts required to mount one sway bar to the torsion arms.

• Corrosion Resistant: Typically features a zinc-plated or galvanized finish to protect the steel against road grime and rust.

• OE Design: Manufactured to the exact dimensions of the original Volkswagen 111-498-101A part for a "no-hassle" installation.

• Improved Handling: Ensures the sway bar remains properly indexed, providing immediate resistance to body roll.

Technical Specifications

• Part Number: 111-498-101A

• Application: Front Sway Bar to Torsion Arm

• Material: Heavy-Gauge Steel

• Kit Includes: Clamps, Bolts, and Hardware

Installation & Maintenance Tips

• Inspect the Bushings: While you have the clamps off, inspect your sway bar bushings. If the rubber is cracked or compressed, the new clamps won't be able to properly tension the bar.

• Alignment: Ensure the sway bar is centered on the vehicle before tightening the clamps. An off-center bar can cause uneven suspension travel and preload one side of the car.

• Torque Sequence: Tighten the bolts evenly to ensure the clamp applies uniform pressure to the bushing and bar.

• Safety First: Always perform this installation with the vehicle securely supported by jack stands. Never work under a car supported only by a floor jack.