111-945-263F VW Beetle Taillight Bulb Holder - 1962-1967 Left or Right Each

Taillight Bulb Holder (Left or Right) – 111-945-263F

The 111-945-263F is a critical component for the electrical integrity of your Beetle. Over decades, moisture often enters the teardrop housing through perished seals, leading to heavy oxidation on the original steel or brass contacts. This corrosion creates high resistance, which leads to dim bulbs or heat buildup that can melt the plastic lens. This replacement unit restores factory-level conductivity and ensures your bulbs snap firmly into place.

This holder is designed for a seamless fit into the original metal teardrop housings, utilizing the factory mounting points for a "plug-and-play" installation.

Detailed Vehicle Compatibility

VW Beetle (Standard & Convertible):

• 1962, 1963, 1964, 1965, 1966, 1967

Product Highlights & Features

• Heat-Resistant Base: Constructed from durable materials that withstand the thermal output of traditional incandescent bulbs without warping or becoming brittle.

• Corrosion-Resistant Terminals: Optimized for long-term use in the exterior environment of the rear fender, maintaining a clean signal for your brake and turn indicators.

• Correct Bulb Indexing: The sockets are notched to ensure that dual-filament bulbs (like the 1157) can only be installed in the correct orientation, preventing the "dim brake light" issue caused by backwards installation.

Technical Specifications

• Part Number: 111-945-263F

• Position: Left or Right (Universal)

• Application: 1962–1967 Type 1 (Teardrop Style)

• Bulb Sockets: 2 (Dual and Single Filament)

Installation & Maintenance Tips

• Clean the Ground Path: The taillight housing relies on a good ground to the fender. When installing the new holder, ensure the mounting screws and the contact points against the housing are free of paint and rust. A poor ground is the #1 cause of "ghosting" signals.

• Use Dielectric Grease: Apply a small dab of dielectric grease to the base of your bulbs before inserting them into the new sockets. This prevents future moisture-induced corrosion and makes the bulbs easier to remove later.

• Check the Main Gasket: Since water is what usually destroys the original holder, always check your Housing-to-Fender Seal (111-945-191E). If the seal is cracked, your new bulb holder will eventually suffer the same fate as the old one.

111945263F

111 945 263F