{"product_id":"28780","title":"VW Vanagon Upper Ball Joint 251-407-361 - 1980-1991 2WD \u0026 Syncro","description":"\u003ch2 data-path-to-node=\"9\"\u003eVanagon Front Upper Ball Joint – 251-407-361\u003c\/h2\u003e\n\u003cp data-path-to-node=\"10\"\u003eThe \u003cb data-path-to-node=\"10\" data-index-in-node=\"4\"\u003e251-407-361\u003c\/b\u003e is a vital pivot point in the Vanagon's front suspension assembly. It connects the upper control arm to the steering spindle, allowing the wheel to move vertically while maintaining the correct camber angle. Because the Vanagon carries a significant amount of weight over the front wheels, these joints are subject to high stress and should be inspected for play or \"clunking\" sounds during every service.\u003c\/p\u003e\n\u003cp data-path-to-node=\"11\"\u003eOver time, the protective rubber boots on original joints can crack, leading to the loss of lubricant and the entry of road grit. Replacing a worn upper ball joint is one of the most effective ways to eliminate \u003cb data-path-to-node=\"11\" data-index-in-node=\"211\"\u003esteering wander\u003c\/b\u003e and prevent uneven tire wear.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"12\"\u003eDetailed Vehicle Compatibility\u003c\/h3\u003e\n\u003cp data-path-to-node=\"13\"\u003e\u003cstrong\u003eVW Vanagon (All Models):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"14\"\u003e1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-path-to-node=\"15\"\u003e\n\u003ch3 data-path-to-node=\"16\"\u003eProduct Highlights \u0026amp; Features\u003c\/h3\u003e\n\u003cul data-path-to-node=\"17\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"17,0,0\"\u003e\u003cb data-path-to-node=\"17,0,0\" data-index-in-node=\"0\"\u003eEliminates Suspension Play:\u003c\/b\u003e Restores the tight, responsive steering feel your Vanagon had from the factory.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"17,1,0\"\u003e\u003cb data-path-to-node=\"17,1,0\" data-index-in-node=\"0\"\u003eNitrile Rubber Boot:\u003c\/b\u003e Equipped with a high-grade, chemical-resistant rubber boot to seal out water and debris.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"17,2,0\"\u003e\u003cb data-path-to-node=\"17,2,0\" data-index-in-node=\"0\"\u003eForged Steel Housing:\u003c\/b\u003e Built with a high-strength housing to withstand the rigors of both highway driving and off-road use in Syncro models.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"18\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul data-path-to-node=\"19\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"19,0,0\"\u003e\u003cb data-path-to-node=\"19,0,0\" data-index-in-node=\"0\"\u003ePart Number:\u003c\/b\u003e 251-407-361\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"19,1,0\"\u003e\u003cb data-path-to-node=\"19,1,0\" data-index-in-node=\"0\"\u003ePosition:\u003c\/b\u003e Front Suspension, Upper\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"19,2,0\"\u003e\u003cb data-path-to-node=\"19,2,0\" data-index-in-node=\"0\"\u003eQuantity Required:\u003c\/b\u003e 2 per vehicle (1 per side)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"19,3,0\"\u003e\u003cb data-path-to-node=\"19,3,0\" data-index-in-node=\"0\"\u003eDesign:\u003c\/b\u003e Bolt-on housing with tapered pin\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-path-to-node=\"20\"\u003e\n\u003ch3 data-path-to-node=\"21\"\u003eInstallation \u0026amp; Maintenance Tips\u003c\/h3\u003e\n\u003cul data-path-to-node=\"22\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"22,0,0\"\u003e\u003cb data-path-to-node=\"22,0,0\" data-index-in-node=\"0\"\u003eHardware:\u003c\/b\u003e It is highly recommended to use new mounting hardware (bolts and nuts) when replacing the joint to ensure the assembly remains secure.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"22,1,0\"\u003e\u003cb data-path-to-node=\"22,1,0\" data-index-in-node=\"0\"\u003eTorque Settings:\u003c\/b\u003e Tighten the upper ball joint to spindle nut to \u003cb data-path-to-node=\"22,1,0\" data-index-in-node=\"64\"\u003e80 ft-lbs\u003c\/b\u003e and the mounting bolts to \u003cb data-path-to-node=\"22,1,0\" data-index-in-node=\"100\"\u003e44 ft-lbs\u003c\/b\u003e.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"22,2,0\"\u003e\u003cb data-path-to-node=\"22,2,0\" data-index-in-node=\"0\"\u003eAlignment:\u003c\/b\u003e While the upper ball joint is a bolt-on part, any work on the front suspension can slightly alter your alignment. It is best practice to have the \u003cb data-path-to-node=\"22,2,0\" data-index-in-node=\"157\"\u003ecamber and toe\u003c\/b\u003e checked after installation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 255, 255);\"\u003e02106\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 255, 255);\"\u003e251407361\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 255, 255);\"\u003e1016202\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 255, 255);\"\u003eV10-7188\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 255, 255);\"\u003eV107188\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 255, 255);\"\u003eTC293\u003c\/span\u003e\u003c\/p\u003e","brand":"IMC, CORP.","offers":[{"title":"Default Title","offer_id":47373148094751,"sku":"251-407-361","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/8797\/1103\/files\/FB_02106_Fro.jpg?v=1769556125","url":"https:\/\/shop.ipconlinestore.com\/products\/28780","provider":"IPC - Import Parts Connection","version":"1.0","type":"link"}