{"product_id":"2307","title":"111-401-129 VW Front Torsion Arm Seal - Beetle \u0026 Ghia (1949-1965)","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch2 data-path-to-node=\"5\"\u003e\u003cb data-path-to-node=\"5\" data-index-in-node=\"0\"\u003eVW Front Torsion Arm Seal – 111-401-129\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp data-path-to-node=\"6\"\u003eThe \u003cb data-path-to-node=\"6\" data-index-in-node=\"4\"\u003e111-401-129\u003c\/b\u003e is an essential rubber dust and grease seal designed for the King and Link Pin front axle beams of early air-cooled Volkswagens. These seals sit at the outermost ends of the axle beam tubes, creating a protective barrier where the torsion arms enter the beam. Their primary function is twofold: they keep the critical chassis grease packed inside the beam tubes and prevent road grime, water, and abrasive dust from entering and wearing down your torsion arm bushings.\u003c\/p\u003e\n\u003cp data-path-to-node=\"7\"\u003eOn many vintage Volkswagens, these seals are either original and severely dry-rotted or missing entirely. When the \u003cb data-path-to-node=\"7\" data-index-in-node=\"115\"\u003etorsion arm seal\u003c\/b\u003e fails, grease escapes and attracts dirt, creating a grinding paste that quickly destroys expensive internal bushings and bearings. Replacing these seals is a low-cost way to extend the life of your front suspension and ensure that the \"King and Link Pin\" front end continues to operate smoothly and quietly.\u003c\/p\u003e\n\u003cp data-path-to-node=\"8\"\u003e\u003cb data-path-to-node=\"8\" data-index-in-node=\"0\"\u003eDetailed Vehicle Compatibility\u003c\/b\u003e This seal is correct for all \"Link Pin\" style front axle beams:\u003c\/p\u003e\n\u003cp data-path-to-node=\"9\"\u003e\u003cb data-path-to-node=\"9\" data-index-in-node=\"0\"\u003eVW Beetle (Standard):\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"10\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"10,0,0\"\u003e1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"11\"\u003e\u003cb data-path-to-node=\"11\" data-index-in-node=\"0\"\u003eVW Karmann Ghia:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"12\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"12,0,0\"\u003e1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"13\"\u003e\u003cb data-path-to-node=\"13\" data-index-in-node=\"0\"\u003eProduct Highlights \u0026amp; Features\u003c\/b\u003e \u003cb data-path-to-node=\"13\" data-index-in-node=\"30\"\u003eDurable Rubber Compound:\u003c\/b\u003e Molded from high-quality, oil-resistant rubber designed to withstand constant exposure to chassis grease and road spray.\u003c\/p\u003e\n\u003cp data-path-to-node=\"14\"\u003e\u003cb data-path-to-node=\"14\" data-index-in-node=\"0\"\u003ePerfect OE Fit:\u003c\/b\u003e Designed to the exact factory 111-401-129 specifications for a snug fit on the axle beam tube ends.\u003c\/p\u003e\n\u003cp data-path-to-node=\"15\"\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"0\"\u003eCritical Protection:\u003c\/b\u003e Acts as a wiper seal for the torsion arms, ensuring that the internal needle bearings and bushings remain in a clean, lubricated environment.\u003c\/p\u003e\n\u003cp data-path-to-node=\"16\"\u003e\u003cb data-path-to-node=\"16\" data-index-in-node=\"0\"\u003eSold Individually:\u003c\/b\u003e Allows for targeted repairs, though four seals are required to fully refresh one front axle beam (Upper and Lower, Left and Right).\u003c\/p\u003e\n\u003cp data-path-to-node=\"17\"\u003e\u003cb data-path-to-node=\"17\" data-index-in-node=\"0\"\u003eTechnical Specifications\u003c\/b\u003e Part Number: 111-401-129\u003c\/p\u003e\n\u003cp data-path-to-node=\"18\"\u003e\u003cb data-path-to-node=\"18\" data-index-in-node=\"0\"\u003eMaterial:\u003c\/b\u003e Flexible Nitrile Rubber (NBR)\u003c\/p\u003e\n\u003cp data-path-to-node=\"19\"\u003e\u003cb data-path-to-node=\"19\" data-index-in-node=\"0\"\u003eApplication:\u003c\/b\u003e Link Pin Axle Beam Ends\u003c\/p\u003e\n\u003cp data-path-to-node=\"20\"\u003e\u003cb data-path-to-node=\"20\" data-index-in-node=\"0\"\u003eQuantity Required:\u003c\/b\u003e 4 per vehicle\u003c\/p\u003e\n\u003cp data-path-to-node=\"21\"\u003e\u003cb data-path-to-node=\"21\" data-index-in-node=\"0\"\u003eInstallation \u0026amp; Maintenance Tips\u003c\/b\u003e \u003cb data-path-to-node=\"21\" data-index-in-node=\"32\"\u003eClean Before Installing:\u003c\/b\u003e Use a rag and solvent to thoroughly clean the end of the axle beam tube and the torsion arm surface. Any grit left behind can tear the new seal during the first few miles of driving.\u003c\/p\u003e\n\u003cp data-path-to-node=\"22\"\u003e\u003cb data-path-to-node=\"22\" data-index-in-node=\"0\"\u003eCheck for Burrs:\u003c\/b\u003e Inspect the metal lip of the axle beam tube for sharp edges or rust flakes that could puncture the rubber. Lightly sand any rough spots before sliding the seal into place.\u003c\/p\u003e\n\u003cp data-path-to-node=\"23\"\u003e\u003cb data-path-to-node=\"23\" data-index-in-node=\"0\"\u003eGrease the Lip:\u003c\/b\u003e Apply a light coating of chassis grease to the inner lip of the seal before sliding the torsion arm back in. This prevents the rubber from \"grabbing\" and tearing during assembly.\u003c\/p\u003e\n\u003cp data-path-to-node=\"24\"\u003e\u003cb data-path-to-node=\"24\" data-index-in-node=\"0\"\u003eThe Full Set:\u003c\/b\u003e Since these seals are almost always in the same condition, it is highly recommended to replace all four at once whenever you have the torsion arms removed for link pin service or beam maintenance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 255, 255);\"\u003e111405129\u003c\/span\u003e\u003c\/p\u003e","brand":"PPI, CORP.","offers":[{"title":"Default Title","offer_id":47372061933855,"sku":"111-405-129","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/8797\/1103\/files\/111405129.jpg?v=1729025614","url":"https:\/\/shop.ipconlinestore.com\/products\/2307","provider":"IPC - Import Parts Connection","version":"1.0","type":"link"}